Syscom DS8116HCIST Manual do Utilizador descarregar pdf (Página 72)

Configuring Network Settings

Network settings must be configured if DVR is used for monitoring over network.

F6-6/7:&+6..4-<8&

To configure general network settings:

1. Click Menu > Settings > Network to enter the Network Settings menu, shown in Figure 1.

Figure 1. Network Settings Menu

2. Select the General tab. Configure the settings on the interface.

3. If you have a DHCP server running and would like your DVR to automatically obtain an IP address

and other network settings from that server, check the DHCP checkbox. You may check the DHCP

status by going to the Network Status tab, as shown in Figure 2.

Figure 2. Network Status

4. If you want to configure your own settings, enter the settings for:

• IP Address: IP address you would like to use for your DVR.

• Subnet Mask: Subnet Mask of network.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 120 121

Sem comentários

Syscom DS8116HCIST Manual do Utilizador Página 72